
詳情介紹
保磁控制設備有兩種系列產品:GTBM系列產品適用于一般定電壓方式控制場合;LPBM系列產品具有保磁功能的同時具有調磁功能,通過自由調節電磁鐵的勵磁電壓,可方便地控制吸放鋼板的張數。此兩系列產品為本公司對原GTBM和LPBMPC系列產品的技術診斷改造升級產品,提高了原系列產品的使用可靠性和技術先進性,明顯減少了用戶的維護工作量。
主要特點Main features
1、作業中遇電網突然停電時,自動切換電源,在設定時間內保證被吸物不致掉落,并可打開卷揚機抱閘,將被吸物安全放下。
2、設備成套性好,配有專門的充電設備及完善的顯示檢測報警裝置。
3、采用閥控式全密封鉛酸免維護電池,充電時無需人工值守,監控電池狀況自動切換充電方式,使用壽命長。
4、裝置輕巧;安裝時無特殊求:維護保養方便。GTBM系列產品還可以增加了行車UPS電源,此UPS電源具有以下功能;
1)、輸入由電池提供的220V直流電壓,輸出380V50Hz的三相交電流。
2)、在吸料時,若電網停電而被吸物下方不具備下放條件,可控制天車的小車移動。
3)、停電時可控制提升機構的交流制動器工作,因此,使用該產品,不必將原來的交流制動器更換成直流制動器。
主要技術參數Main technical data
選型及注意事項Attentions for model selection
1、電磁鐵額定電壓與設備輸出電壓相符;電磁鐵的電流(消耗功率)之和應小于或等于整流控制設備的輸出電流(功率)。
2、起重設備提升機構的電磁抱閘,在不使用行車UPS電源的情況下,應改為直流電磁抱閘。
3、工作環境溫度在50℃以上,或有改型、擴容等特殊要求,訂貨時需注明。
1.The rated voltage of the electromagnet is in conform ith the outpu rolage of the equipments;The total current (consumption poeerof the electromagnet shall be less than or equal to the output current (pover) of the commutation controlling units.
2.Electromagnetic band-tope brake of lifning device of the lifn equipment shal be changed into DC electromagnetic band-tope brake when the UP'S poues source of the crane is not vailable.
3.Environment working temperature shall be over 50℃,lf there is othen special requirements for modification,enlarging the capacity and ete,shall note when ordered.
設備成套性Eqiupment integration
主要特點Main features
1、作業中遇電網突然停電時,自動切換電源,在設定時間內保證被吸物不致掉落,并可打開卷揚機抱閘,將被吸物安全放下。
2、設備成套性好,配有專門的充電設備及完善的顯示檢測報警裝置。
3、采用閥控式全密封鉛酸免維護電池,充電時無需人工值守,監控電池狀況自動切換充電方式,使用壽命長。
4、裝置輕巧;安裝時無特殊求:維護保養方便。GTBM系列產品還可以增加了行車UPS電源,此UPS電源具有以下功能;
1)、輸入由電池提供的220V直流電壓,輸出380V50Hz的三相交電流。
2)、在吸料時,若電網停電而被吸物下方不具備下放條件,可控制天車的小車移動。
3)、停電時可控制提升機構的交流制動器工作,因此,使用該產品,不必將原來的交流制動器更換成直流制動器。



2、起重設備提升機構的電磁抱閘,在不使用行車UPS電源的情況下,應改為直流電磁抱閘。
3、工作環境溫度在50℃以上,或有改型、擴容等特殊要求,訂貨時需注明。
1.The rated voltage of the electromagnet is in conform ith the outpu rolage of the equipments;The total current (consumption poeerof the electromagnet shall be less than or equal to the output current (pover) of the commutation controlling units.
2.Electromagnetic band-tope brake of lifning device of the lifn equipment shal be changed into DC electromagnetic band-tope brake when the UP'S poues source of the crane is not vailable.
3.Environment working temperature shall be over 50℃,lf there is othen special requirements for modification,enlarging the capacity and ete,shall note when ordered.
設備成套性Eqiupment integration